Digital Barometer

9 March 2020

 Introduction

Digital barometer  (P/N:193-5859)  as a device to prevent possible deficits in compression step, Ayriko Engine Combustion Chamber Pressure Information Recording and Measurement Device is designed and produced.
By this device, user can record and analyze accurate information of produced pressure in cylinder chamber through a computer and, if needed, he/she can print such information as a graph and paperwork.

With the capacity of recording the information of 12 cylinders simultaneously

Ayriko core competencies

 

Engine efficiency improvement

Prevention of harm to crank

Reduction of Depreciation during the information recording

High accuracy and velocity in measurement and Chamber Pressure Information Recording

Values reporting and analyzing capability

 Ayriko has two functional model:

Fast Mode:

In this mode, Ayriko digital barometer can record the pressure information of combustion chamber with the velocity of 1millisecond for each selected channel. In this way, the engine is ON and crank shaft rotates with its nominal starting capacity (1500rpm).

Slow Mode:

In this mode, Ayriko digital barometer can record the pressure information of combustion chamber with the velocity of 5miliseconds for each channel and maximum 12 channels simultaneously. In this way, the engine runs with nominal starting capacity (150rpm).

 Usage vision of ayriko digital barometer

  • Not sealing valves

  • Piston ring fracture

  • Obsolescence of Piston ring

  • Cylinder head gasket fracture

  • Fractures or spillover of valves

  • Obsolescence of cylinder ester bush

  • Piston ring adhesion to cylinder compartment

  • Accumulation of residuals on piston and bottom cylinder head

digital barometer
digital compressor keypad
digital barometer sensor
digital barometer cable
digital compressor Log
digital barometer software

 Ayriko  reports

Ayriko's digital barometer (P/N:193-5859) has been installed and tested on a variety of gas generator and diesel generators, such as Caterpillar, Wartsilla, MWM , Guascor, Perkins and ...
Click here to see outputs log of the Ayriko machine.

Click here to see more videos.

Related Post

align device

 Align device Generator Engine After the generator is mounted on the engine chassis, there is an important issue that needs to be aligned between the generator and the engine. Failure to do so will cause the coupling to tear and eventually damage the fixed and removable bearings on the crankshaft. To do this, Ayriko has […]

generator oil cooler

 Generator Oil Cooler In gas and diesel engines, oil is used for cooling and lubrication in different parts of the engine, and oil cooler is used to reduce the oil temperature and The way it works is that the hot oil enters the oil cooler from one side and exits the other side, and the […]

Generator engine coupling

 Generator engine coupling The engine itself is not capable of generating electricity and generating electricity is the task of the generator; In order to be powered by an engine and generator, the two devices need to be connected to each other by means of a coupling. Examples of generator motor coupling types are shown below:

Generator Turbocharger

Generator Turbocharger The generator turbocharger consists of two parts, the turbine and the compressor, which are mounted on the shaft and are one of the generator's power- boosting components which increase the power of the inlet air, which increases the density of the fuel-air mixture, resulting in increased engine power; The combustion of the device hits the turbine […]

Leave a Reply

Your email address will not be published. Required fields are marked *