The ayriko digital barometer is designed and manufactured to measure and record engine combustion chamber pressure information to prevent possible faults in the compression stage. This machine can record and analyze the exact pressure data generated in the cylinder compartment on the computer and print it if needed.
The spark voltage transducer can increase the level of the input voltage of the trans spark by several times, for example, the voltage of the transistor can be 24 volts, which can be increased to 12,000 volts as a result of the spark transmitter.
In diesel and gas generators, governor boards with different brands are used to control the engine's range. The function of all of these boards is first to read the engine speed by the Peakup sensor, so at the moment the engine starts, it reads the engine's range controller board and then It commands the opening of the throttle valve.
The generator turbocharger consists of two parts, the turbine and the compressor, which are mounted on the shaft and are one of the generator's power- boosting components which increase the power of the inlet air, which increases the density of the fuel-air mixture, resulting in increased engine power.
The engine itself is not capable of generating electricity and generating electricity is the task of the generator; In order to be powered by an engine and generator, the two devices need to be connected to each other by means of a coupling.
Generator Engine After the generator is mounted on the engine chassis, there is an important issue that must be leveled between the generator and the engine,This means that the center of the generator should be aligned with the center of the motor or the crankshaft.
In gas and diesel engines, different parts of the engine use oil for cooling and lubrication, which uses an equipment called an oil cooler to lower the temperature of the oil,It flows out of the other side, and water flows in from one side to the other.